One pallet and two flat mask machine

The outer ear is equipped with a one-to-two mask machine

This machine is a fully automatic one-pallet two-plane mask machine, which is composed of a body mask machine connected by a shunt machine and two ear strap spot welding machines. The mask body is directly transmitted to the diverter after being shaped, sheared, formed and welded and punched by the body mask machine, and shunted to the earband spot welding machine material tray for earband welding to obtain a complete finished mask product, realizing fully automated production, with an output of 100-120 pcs/min, to meet the requirements of mass production, the equipment only needs to be operated by 1 person, and the user only needs to conduct two days of training or video learning to independently debug the production.

The outer ear mask machine can only produce a one-time plane mask, and the ring can produce a three-dimensional or N95 mask, whether the mask produced by this machine is medical or not has nothing to do with the machine, as long as the mask is sterilized, the mask produced by this machine can be used to make surgical masks.

Commonly used medical masks: mainly composed of three layers of non-woven fabric. The inner layer is ordinary non-woven fabric; The outer layer is a non-woven fabric with waterproof treatment, which is mainly used to isolate the liquid sprayed by the patient; The middle filter layer is made of polypropylene meltblown non-woven fabric with electret treatment; Finally, after the production is completed, it will be sterilized by ethylene oxide and allowed to stand for 7 days to exert toxicity, then sealed and packaged, packed and transported.

1. Technical parameters

How much does the machine occupy? ：6500(L)×3500(W) ×1800(H)MM

Voltage: AC380V, 50HZ/60HZ,

Output: 100-120?/min

Power consumption: 8.5KW

Second, the product characteristics of the whole machine

1. High stability, low failure rate, beautiful and sturdy without rust.

2. Computer PLC programming control, servo drive, high degree of automation.

3. Photoelectric (optical fiber) testing raw materials to avoid mistakes and reduce waste. Is this machine full? Activation? Production of folding mask body machine, including automatic delivery of raw materials; Automatic transportation, cutting off the nose bridge strip, mask edge welding, folding, ultrasonic fusion, forming and cutting and other whole process automation.

2. Mechanical characteristics:

1. Automatic tension control of raw materials to ensure balanced tension of raw materials.

2. Computer program control, high output, good stability and low failure rate.

3. Photoelectric detection of raw materials, avoid mistakes and reduce waste.

4. Can produce up to four layers of mask body.

5. This machine has the function of total counting and batch counting, and the number of batch counting can be set arbitrarily.

6. Changing the mold can produce different sizes and different styles of masks.

7. The discharge is automatically stacked and the number of layers can be set for packaging.

3. Mechanically adjustable parts:

1. The folded part can be adjusted;

2. The pattern of the welding point of the mask body can be specified or designed by the customer;

3. Masks that can be mechanically made of 1-4 layers of fabric (activated carbon materials can be added in the middle);

4. The welding strength can be adjusted.

Delivered in Dongguan