Key points of maintenance and repair of coating machine dispensing equipment

1. When dismantling and maintaining the work, it is best not to wear earrings, watches, necklaces, bracelets and other ornaments that can conduct electricity to prevent accidents.

2. Before the maintenance and repair of the hot melt adhesive coating machine, the power supply user on the hot melt adhesive coating machine and the total power supply of the external world must be cut off, and the operation must not be live.

3. Do not disassemble and inspect any parts on the hot melt adhesive coating machine at will, unless you have enough understanding of the performance of the equipment.

4. Unless there are other personnel to assist, and in the event of an accident, due to mechanical damage or injury to the personnel, help or first aid can be given immediately, otherwise do not disassemble and repair the hot melt adhesive coating machine equipment alone.

5. Only qualified personnel can repair and maintain the hot melt adhesive coating machine.

6. Under no circumstances should you touch the wire joints or other components that may be exposed to the outside world and are not loosened.

7. Before disassembling or moving the protective device on the hot melt adhesive coating machine or replacing the component components, the power supply must be cut off.

8. If possible, try to stand on the plastic blanket for maintenance and repair. Never perform maintenance work on a hot melt adhesive coater on a flooded floor or in a very humid environment.

9. When maintaining and repairing the hot melt adhesive coating machine, safety gloves, goggles and long-sleeved overalls must be worn to avoid the body being burned by the high-temperature liquid hot-melt or the surface of the high-temperature components.

10. When loosening or installing the pressure joint, it must be determined that the pressure to provide the pressure air source for the hot melt adhesive coating machine has been reduced to zero.

11. When cleaning the hot melt glue melting tank, avoid using fireworks or sharp hard tools to avoid scratching the Teflon non-stick coating inside the rubber barrel.

Because of professionalism, so focused! The Alliance will always open the door to welcome your presence and guidance.

National sales fever: 13922900580 (Mr. Chen)