Process Basics ∣ Coating Solution

Coating solution is one of the main raw materials in the coating process, and is one of the main elements to form the functional properties and use characteristics of coating composites.

The coating solution in the coating process needs to be formulated to form specific functional properties and usable characteristics.

The raw materials of coating solution are mainly distinguished in the following ways:

By raw material category: raw rubber, solvent, additives, curing agent

According to the resin system: acrylic, polyurethane, rubber, silicon-based

According to coating function: pressure-sensitive adhesive, composite adhesive, functional coating, primer, etc

According to the dispersion system: solvent-based, water-dispersible, solvent-free, hot-melt type

Due to the different application fields of different coating solutions, their characteristics are also different, and the curing methods are also different, but they are generally divided into two types: light curing or thermal curing, and thermal curing products generally need to go through the curing process.

Of course, there are also some glues that are fully formed before the coating process due to their particularity, so they do not need to be cured, only dried or shaped. Coating solution is one of the main raw materials in the coating process, and is one of the main elements to form the functional properties and use characteristics of coating composites.

The coating solution in the coating process needs to be formulated to form specific functional properties and usable characteristics.

The raw materials of coating solution are mainly distinguished in the following ways:

By raw material category: raw rubber, solvent, additives, curing agent

According to the resin system: acrylic, polyurethane, rubber, silicon-based

According to coating function: pressure-sensitive adhesive, composite adhesive, functional coating, primer, etc

According to the dispersion system: solvent-based, water-dispersible, solvent-free, hot-melt type

Due to the different application fields of different coating solutions, their characteristics are also different, and the curing methods are also different, but they are generally divided into two types: light curing or thermal curing, and thermal curing products generally need to go through the curing process.

Of course, there are also some glues that are fully formed before the coating process due to their particularity, so they do not need to be cured, only dried or shaped.